Home > Products > Air Cooler Turbine > Air - water heat exchanger of cooling unit

Air - water heat exchanger of cooling unit

Payment Type:
T/T
Incoterm:
FOB,CFR,CIF,EXW
Min. Order:
1 Set/Sets
Transportation:
Ocean
Port:
Shanghai
Share:
  • Product Description
Overview
Product Attributes

Model No.Air cooler

Place Of OriginChina

Air Cooler Structurehorizontal placement

Tube Bundle Type"GP6X1.95-6-98.2-1.21S-17.32/DR-VIa"

Tube Bundle MaterialSA179 K01200

Fan ModelG-TF15L4-Z4

Motor ModelYB3-160M1-8 380V, 50HZ

Frame TypeGJP6×1.95B-15/3F

Fin MaterialAL 1060

Supply Ability & Additional Information

PackagingModules are shipped in bulk/packaged

TransportationOcean

PortShanghai

Payment TypeT/T

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Set/Sets
Package Type:
Modules are shipped in bulk/packaged

Air - water Heat Exchanger of cooling unit



Product introduction

Air cooler, referred to as "air cooler", also called fin fan, commonly used to replace the water cooled shell - tube heat exchanger cooling medium. It is a device for cooling or condensing the high temperature process fluid inside the tube by sweeping the finned tube with ambient air as the cooling medium. Air cooler is mainly used in petroleum, chemical, metallurgy and other air cooler supporting use, with large air volume, high efficiency, low vibration, low noise, easy maintenance and other advantages. The air cooler is mainly composed of tube bundle, support and fan. The type and material of tube bundle have great influence on the performance of air cooler. Because the heat transfer coefficient of the air side is very small, it is often added in the tube fin, in order to increase the heat transfer area and fluid turbulence, reduce the thermal resistance. Most air coolers use radial fins. Industrial Air Cooler,Greenhouse Air Cooler,Cooling System Evaporative Air Cooler Air coolers usually use light tubes with an outside diameter of 25mm, low fin tubes with a fin height of 12.5mm and high fin tubes with a fin height of 16mm. Fins are generally made of a material with high thermal conductivity (most commonly aluminum) and are wound or mounted onto the light tube.


Air cooler-2



Product parameter


Air cooler structure: horizontal placement

Tube bundle type: "GP6X1.95-6-98.2-1.21S-17.32/DR-VIa"

Tube bundle material: SA179 K01200

Fin material: AL 1060

Fan model: G-TF15L4-Z4

Motor model: YB3-160M1-8 380V, 50HZ

Frame type: GJP6×1.95B-15/3F



Note:

1. The medium, temperature and pressure in the pipe should meet the design conditions, and overpressure and overtemperature operation is strictly prohibited;

2, the pipe pressure, temperature, should be slowly step by step, so as not to damage the equipment due to impact heat;

3, the air cooler normal operation, should first open the fan, and then to the tube bundle into the medium, stop the operation, should first stop to the tube bundle into the medium, then stop the fan;

4, the negative pressure operation of the air cooler boot, should first open the air extractor, tube to reach the specified vacuum degree and then start the fan, and then through the tube medium, shut down, according to the opposite procedure, winter operation, open the air extractor, to reach the specified vacuum degree, first through the tube medium, then start the fan, so as not to freeze the tube can not run;

5. When stopping, low pressure steam should be used to purge and clean the condensate to avoid freezing and corrosion.





Product Categories : Air Cooler Turbine

Home > Products > Air Cooler Turbine > Air - water heat exchanger of cooling unit
Email to this supplier
  • *Subject:
  • *To:
    Ms. Gelan
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send